Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
CALL FORWARD-FOLLOW ME
Description
A user can direct the system to immediately re-
route(forward) calls to another station. Call
Forward, Follow-Me can be activated at the
user's station or from any other station in the
system allowed access to Call Forward. It must
be programmed from the station that you will be
forwarded to and a user password must be
entered at the user's station first.
Operation
To activate Follow-me Call Forward from any
station,
1. Lift the Handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Code '0'.
4. Dial forwarding station number.
5. Dial forwarding station authorization code.
6. Replace the Handset and go on-hook.
To deactivate Follow-me Call Forward from the
station, (only the user's own station, not at any
other station)
1. In idle state;
Press the [DND/FOR] button.
2. In off-hook state,
Press the [DND/FOR] button and dial #.
Admin Programming
n
Call Forward (PGM 111-BTN 2)
n
Authorization Code Table (PGM 227)
Condition
1. Authorization code should be registered to
use Follow-me Call Forward.
CALL FORWARD-INCOMING CO LINE
OFF-NET
Description
The system attendant can direct the system to re-
route(forward) incoming CO line calls to a
directory (telephone) number outside the system.
When a call is received, the system will access
an outgoing CO line and dial the telephone
number assigned by the attendant. Note that the
system will automatically disconnect the call after
the Unsupervised Conference Timer has expired.
Operation
To activate CO Line Off-Net Call Forward from
the attendant;
1. Lift the handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward code '7'.
4. Dial CO line/group access code (9, 81-8x,
8801-88xx, or 8* for all CO lines) or press
{CO line} button.
5. Dial the Speed Dial bin number with the
desired telephone number.
6. Replace the Handset and go on-hook.
To deactivate CO line Off-Net Call Forward from
the attendant;
1. Lift the Handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward code '7'.
4. Dial CO line/group access code (9, 81-8x,
8801-88xx, or 8*) or press {CO line} button.
5. Dial #.
Admin Programming
n
Call Forward Access (PGM 111-BTN 2)
n
Unsupervised Conference Timer
(PGM 182-BTN 6)
Condition
1. If there is no idle CO line, Off-net Call
Forward is not activated.
2. This feature is not applicable for DID line.
3. It is unconditional and forwarded immediately
when the CO line rings in the system.
4. If a speed bin is programmed in a Flex.
Button, you may press the Flex. Button
instead of dialing the speed bin number.
5. Toll restriction will be based on the COD of
outgoing CO line. But, it doesn't care CO
Account code.
2-3
LDK-
Intercom Features
Advertisement
Table of Contents
