Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
Admin Programming
n
Speakerphone/Headset (PGM 111-BTN 11)
n
Speakerphone/Headset Ring (PGM 1 11-BTN
10)
Condition
1.
LKD-2NS keyset has no microphone and
doesn't function as handsfree unit.
STATION GROUP:
CIRCULAR/TERMINAL/UCD/RING/VM
Description
Stations can be grouped so that incoming calls
will search for an idle station in the group and the
call will be answered.
The number of station group and the number of
station in a group as follows;
Station Group
LDK-24
10
Several VMIB announcements may be provided to
the station group. If a call is not answered until the
st
1
Announcement Timer expires. The second
announcement will be provided if the call
continues to wait beyond the queue to the 2
Announcement Timer. The second announcement
may be repeated until the call is answered or
disconnected.
Station group may be assigned as one of the
following 5 types;
- Circular Station Group
In Circular Hunt, calls to a station in the group
or a pilot number will go to the station or an idle
station
in
the
group.
unanswered in the hunt no answer time, the call
is directed to the next station in the group. The
call will continue to route until each station in
the group has been tried. The call will remain at
the last station in the group or will be passed to
the assigned overflow station/group. A circular
station group can be assigned with a pilot
number (station group number) and only calls to
the pilot number will hunt.
Station in a Group
10
nd
If
unavailable
or
3-24
- Terminal Station Group
Calls to a station in the group or a pilot number
will go to the first station in the group. If
unanswered or unavailable, the call proceeds to
the next listed station in the group. The call will
continue to be rerouted until reaching the last
station in the group where the call will remain or
can be sent to an overflow station/group. A
terminal station group can be assigned with a
pilot number (station group number) and only
calls to the pilot number will hunt.
- UCD Station Group
Calls are sent to the group by dialing the pilot
number (Station Group Number) or assigning
CO lines to directly terminate to the group. Calls
are directed to the station in the group that has
been idle for the longest time. If all stations in
the group are busy when a call is received for
the group, the call may be routed to an
alternate location, or may continue to wait
(queue) for an available station in the group.
Based on programming, the queued call may
be taken out of the group and directed to an
overflow station.
The member of UCD group can assign DND.
The station assigned UCD-DND will not receive
ring.
To assign UCD-DND button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + 8
7 + Hunt Grp No. + [HOLD/SAVE]
Note: Do not make a loop with UCD group
alternative destination.
- Ring Station Group
All the stations in the group receive ring
simultaneously for a call of station group until
one of stations received ring answers the call. If
call is not answered until overflow timer, it will
be sent to an overflow destination, if assigned.
- Voice Mail Station Group
This group is assigned for voice mail and only
SLT can be assigned as a member of station
group. Calling VM group, the system will search
an idle member in the calling VM group with
Terminal type or Circular type.
LDK-
System Features
Advertisement
Table of Contents
