Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
2. Place a call to an external party.
3. When answered, press the [CONF] button.
4. When all parties have been called, press the
[CONF] button again. And all parties can
converse.
To make Unsupervised Conference,
1. During a conference, press the [CONF]
button in supervisor.
2. The conference is still connected and the LED
of [CONF] button of supervisor is flashing.
3. To re-enter the conference, lift handset and
flashing [CONF] button in supervisor.
Admin Programming
n
Unsupervised Conference Timer (PGM 182-
BTN 6)
n
Multi-line Conference (PGM 160-BTN 9)
Condition
1. In unsupervised conference, it is restricted to
Unsupervised Conference timer if there is no
internal station in the conference. (Default:
10min.)
2. The Unsupervised Conference timer will be
reset if the internal party reenters the
conference.
3. Max. 6 parties (internal/external) can enter a
conference.
4. In Multi-line conference, max. 5 CO lines can
make a conference with one internal party.
5. If the supervisor in a conference receives
error or busy tone from the internal party while
making a conference, he can receive intercom
dial tone again by pressing the [CONF] button.
CO LINE WARNING TONE
Description
It allows e ach station to receive warning tone to
remind the call elapsed time while outgoing CO
line call.
Admin Programming
n
CO Line Warning Tone Timer (PGM 180-
BTN 22)
n
3-Minute Warning Tone (PGM 112-BTN 1)
Condition
1.
Warning tone is received prior to 15 seconds
on timer expiration.
2.
It is not applied for Tie Line.
CUSTOMER SITE NAME REGISTRATION
Description
This feature allows users to register customer site
name based on the system. It will be available to
print SMDR records or access remote control as a
header.
Operation
It
will
be
automatically
programmed.
Admin Programming
n
Customer Site Name Registration (PGM
100-BTN 2)
DATA LINE SECURITY
Description
A station can be assigned with 'Data Security',
which will block attempts by other stations and
the attendant from overriding, or camp-on to the
station. In this way, transmitted data from the
station is protected from accidental corruption
from a camp-on or override tone. Fax extensions
should usually be given this status.
Admin Programming
n
Data Line Security (PGM 111-BTN 4)
Condition
1. If an analog extension (Data, Fax), which is
assigned to data line security, makes an
external call via ISDN line, 3.1KHz Setup
message will be sent to ISDN CO line
3-8
LDK-
System Features
provided
when
Advertisement
Table of Contents
