Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
.'SLT DTMF RLS TMR' should be adjusted to
6.
reasonable value in order to print all digits that
SLT dialed.
SMDR – Call Cost Display
Description
With the PRU or PRCPTU installed o n LCOB4
or LCOB2, the system can be programmed to
display an estimated cost for outside calls on a
fixed charge per call metering pulse, as
assigned in the system. The cost is shown in the
LCD instead of the call timer and is updated
based on receipt of each call metering pulse.
Admin Programming
n
Metering Type (PGM 142-BTN 3)
n
SMDR Cost per Unit Pulse (PGM 177-BTN
10)
n
SMDR Fraction (PGM 177-BTN 11)
Condition
1.
The call cost is displayed based on "Call
Metering Pulse".
2.
When a call is in hold, the holding time is
included in the call cost display.
3.
If the cost per call metering pulse is set to
0.00, the display for outgoing calls will show
the call duration.
SMDR – Lost Call Printing
Description
Lost call means that the caller gives up and
terminates the call b efore the call is answered.
The format of the individual call record is
illustrated below, and the contents are focused on
each case about the types of lost call.
NO STA CO TIME
START
----- ---- --- ------ ----------------- -----------------------
0001 EXT 001 00:00:10 24/05/99 11:55 R RING 00:05
Normal incoming call is received at an assigned stations of CO
031 during 5 sec.
0002 101 003 00:01:20 25/05/99 16:23 R RNG 00:09
DID call is disconnected during it is being forwarded to ATD
STA 101, because the dialed station does not exist.
0003 100 001 00:00:20 25/05/99 18:11 R100 RING 00:04
DID call is received at STA 100 during 4sec and disconnected.
0004 102 002 00:01:20 26/05/99 18:37 R103 RING 00:04
DID call is received at STA 102 via unconditional call forward
to STA 103 during 4 sec and disconnected.
0005 621 008 00:00:20 26/05/99 13:02 G620 RING 00:06
DID call is received at Ring Group 621 during 6sec and
disconnected.
0006 100 001 00:00:04 06/05/99 16:04 H100 RING 00:02
DID call is disconnected while STA 100 is being held it.
0007 102 001 00:00:07 06/05/99 17:04 H100 RING 00:02
DID call is disconnected while it is being transferred from STA 100
to STA 102.
G: Incoming call to hunt group, but the caller
H: 1. Answered incoming call was transferred to
R: Direct call (DID) to a station, but the call was
Operation
To print the lost call count of record,
1. Press the [TRANS/PGM] button.
2. Dial 0117 at Attendant station.
3. The lost call count of record is printed in the
To clear the lost call count of record,
1. Press the [TRANS/PGM] button.
2. Dial 0118 at Attendant station.
3. "The lost call count is cleared" is printed and
Admin Programming
n
DIALED
n
n
Condition
1.
2.
3.
3-21
hangs up before answer
another extension, but the caller hangs up
before answer.
2. Incoming call placed on hold state and
cleared down in hold state.
disconnected before the station answers. Or
direct call to station (A), but station (A) does
not answer and the call was forwarded to
station (B). The call was disconnected before
station (B) answers.
PC connected in the system.
the lost call count time is restarted.
SMDR Print Enable (PGM 177-BTN 2)
SMDR Recording Call Type (PGM 177-BTN
3)
Print Lost Call (PGM 177-BTN 6)
This SMDR record is sent to RS-232C
automatically as soon as the event takes
place.
The SMDR record about lost call is not saved.
Only the records are counted.
To activate this SMDR record, the SMDR field
LDK-
System Features
Advertisement
Table of Contents
