Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
n
Idle Line Selection (PGM 122)
Condition
1.
A station can be assigned to Hot line or
Warm line by Admin Programming (PGM
113-BTN 7).
2.
If there is no flexible button in a station, the
number is operated as speed dial number.
3.
The setting value of Warm Line timer should
be less than that of Dial Tone timer.
4.
A flexible button may be assigned as {Idle
Line Selection} button. When lifting handset
or pressing the [MON] button, the system will
be activated as a predefined button is
pressed.
5.
It is possible to activate in SLT station.
INTERCOM BOX
Description
A convenient ICM box can be connected to the
system. The ICM box can receive page
announcements and intercom calls. And the
ICM box can signal assigned stations in the
system. Any combination of keysets or ICM
boxes can be arranged in the system.
Operation
To call an ICM box,
1. Lift the handset or press the [MON] button.
2. Dial ICM box intercom number or press the
DSS flexible button for the ICM box.
3. After warning tone, announce the call.
To place a call from an ICM box,
Press the [CALL] button and assigned station will
ring.
To answer an ICM call at a station assigned for
ICM box signals,
Press DSS flexible button for ICM box.
To place ICM box to DND mode,
Press the [DND] button.
Admin Programming
n
ICM Box Signaling (PGM 111-BTN 6)
n
Station ID Assignment (PGM 110)
n
ICM Box Music Port (PGM 171-BTN 3)
n
ICM Box Timer (PGM 181-BTN 6)
Condition
1. While hearing music at ICM box, press the
[DND] button to stop the music.
2. ICM Box cannot attend a conference.
3. The CO ring is not received at ICM box.
4. An ICM box can be a member of page zone
group.
5. To receive ICM box call at SLT or WHTU, set
ICM Box Signaling value to ON.
6. SLT and WHTU can receive only one call
from ICM box.
INTERCOM CALL
Description
The system incorporates a non-blocking internal
communications network(intercom) which can
be accessed by all stations connected to the
system. A station is allowed to call another
station in the system or to access page zones
by dialing the applicable number from the
numbering plan.
Operation
To place an intercom call,
1. Lift the handset or press the [MON] button.
2. Dial the desired station number.
3. If the called station is in the intercom ring
mode, ring back tone is received.
If the called station is in the privacy or HF
answer mode, intercom call announcement is
received and the calling party can announce
the call.
Admin Programming
n
ICM Dial Tone Timer (PGM 181-BTN 7)
n
Inter-digit Timer (PGM 181-BTN 8)
Condition
1. The interval between the digits cannot
exceed Inter-digit timer. If not, error tone will
2-8
LDK-
Intercom Features
Advertisement
Table of Contents
