Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
CALL FORWARD-PRESET
Description
The system can be configured so that incoming
CO lines, which are programmed to ring to
station, can be forwarded to an assigned station
or hunt group, if the call is not answered in a
predetermined time, Preset Forward Timer.
Admin Programming
n
Preset Call Forward Timer (PGM 181-BTN
12)
n
Preset Call Forward (PGM 121)
Condition
1. In Preset Call Forward, a busy station will not
receive a CO line ring and the next assigned
station will receive the CO line ring. If the
station is the last station in the chain, then
the call will not be forwarded and continue to
ring at the station until answered.
2. The loop of Preset Call Forward is not
available.
3. When a CO line is forwarded with Preset Call
Forward, the station programmed to ring will
stop ringing. (The LED of {CO line} button will
be flashing continuously.)
4. Preset Call Forward will only forward to a
programmed station or hunt group member,
which has a {CO line} or {LOOP} button. If
there is no direct {CO line} or {LOOP} button,
the station will be bypassed.
CALL FORWARD-STATION OFF-NET
Description
Stations allowed call forward access can
forward intercom and transferred CO line calls
to a directory number (telephone number)
outside of the system. When a call is received,
the system will access an outgoing CO line and
dial the telephone number entered by the user.
If a station assigned off-net call forward
received a call from internal/external caller, the
call is forwarded to off-net unconditionally (Code
5) or after No Answer Ring timer is expired
(Code 6).
Operation
To activate Off-Net Call Forward (unconditional),
1. Lift the handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Code 5.
4. Seize a CO line, if required.
5. Dial the Speed Dial bin number with the
desired phone number.
6. Replace the handset and go on-hook.
To activate no answer off-net call forward,
1. Lift handset or press [MON] button.
2. Press [DND/FOR] button.
3. Dial Call Forward Code 6.
4. Seize a CO line, if required.
5. Dial a speed bin number with the desired
phone number.
6. Replace the handset and go on-hook.
To deactivate Off-Net Call Forward,
1. In idle state;
Press the [DND/FOR] button. Or,
2. In off-hook state,
Press the [DND/FOR] button and dial #.
Admin Programming
n
Call Forward (PGM 111-BTN 2)
n
Off-net Mode (PGM 112-BTN 12)
n
Call Forward No Answer Timer (PGM 181-
BTN 1)
Condition
1. No answer off-net call forward will take
place after Call Forward No Answer timer is
expired.
2. Call forward will remain set until it is
released
manually
attendant.
3. If a speed bin number is programmed in a
Flex. button, you may press the Flex. button
instead of dialing the speed bin number.
4. Toll restriction will be based on the COS of
forwarding station and the COS of outgoing
CO line.
5. The calling station should have a {CO line},
{LOOP} or {POOL} button to make Off-net
call forward. If there is no available {CO
line} button, the call will not be forwarded.
2-4
LDK-
Intercom Features
by
the
station
or
Advertisement
Table of Contents
