Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
3. Confirmation tone is heard and replace the
handset.
4. When the SLT becomes idle state, intercom
ring is received.
Condition
1. If a voice message is recorded in a SLT, the
recorded message will be played by dialing
message wait retrieval code (5 5 7). The
played message will be deleted automatically
after being played.
2. When user dials 5 5 7 to retrieve voice
message wait, the only one message is
played. After the first message is played,
warning tone will be heard to indicate
remained messages. To retrieve another
message, dial 5 5 7 again.
MESSAGE WAITING INDICATION
Description
Industry standard message waiting telephones
may be connected to the system and, under
software control.
Admin Programming
n
Station ID Assignment (PGM 110-BTN 1)
Condition
1.
When lifting handset, user will hear DND
warning tone for indicating message waiting.
2. When message waiting indication prompt is
recorded in system greeting 097, voice
announcement will be heard instead of DND
warning tone.
SIGNALING
Description
The ring cadence for SLT can be changed by
changing ring signal.
Admin Programming
n
SLT Ring Phase Time (PGM 182-BTN 4)
n
Single Ring for CO on SLT (PGM 161-BTN
7)
SMDR ACCOUNT CODE
Description
User can count call cost registered to SMDR
billing information. While on an outside call, user
may enter a series of digits which will be include
in SMDR call record. The digits, "Account Code"
can be used to allocate cost or time for the call.
Operation
To enter account code while on an outside call
from an SLT,
1. While on a call, hook-flash and intercom dial
tone is heard.
2. Dial 5 5 0.
3. Dial the account code. (Entering 12 digits,
pressing end mark * or hook-flashing to save
account code.)
4. Hook -flash and it is reconnected to the
external party.
To enter account code before a call is made,
1. Dial 5 5 0.
2. Dial the account code. (Entering 12 digits,
pressing end mark * or hook-flashing to save
account code.)
3. Intercom dial tone is heard.
4. Seize a CO line to make a call with account
code.
Condition
1.
You may enter the account code before a call
is established.
SMS SLT
Description
This feature allows connecting a SMS SLT
phone in LDK -24 System.
can receive and send the SMS message.
Operation
5-5
LDK-
SLT Features
Then, a SMS SLT
Advertisement
Table of Contents
