Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
confirmation tone is heard.
Condition
1.
In Message Wait/ICM Queuing/Call Transfer/
Attendant Override, the ring is received with
T mode regardless of the assigned ICM
Signal mode.
2.
Intercom signal mode will not affect the voice
announcements from internal/all call paging.
INTERCOM STEP CALL
Description
When a station receives a busy signal after
placing an intercom call, the user can request a
call to a different station by dialing only the last
digit of the new station number.
Operation
To use Step Call when receiving intercom busy
tone,
If the next station to be called has the same first
digit as the called busy station, dial the last digit
of the next station.
INTERCOM TENANCY GROUP
Description
A station can be assigned to one of the system
Intercom
Tenancy
Groups.
Tenancy Group can be operated independently
and the stations in the group can be assigned
an individual CO group to use. Max. 5 for LDK -
24 Intercom Tenancy Groups can be assigned
in the system.
Each group can be assigned with attendant and
can be programmed to allow or deny calls to
other groups (allowed access groups). Stations
in a group are allowed access to other stations
based on the allowed access of the calling
group (setting with station base).
Admin Programming
n
n
Condition
1. When a call to other Intercom Tenancy Group
2. It is not allowed to stations to have the same
3. The attendant of ICM Tenancy Group can be
4. When the attendant of ICM Tenancy Group
INTERCOM TRANSFER
Description
A station can transfer an intercom call to the
other station. A transferred intercom will not be
recalled.
Operation
To make unscreened intercom transfer,
1. Press the [TRANS/PGM] button. (The
2. Dial a station number to receive the transfer.
3. When hearing ringback tone, replace the
To make screened intercom transfer,
Each
Intercom
1. Press the [TRANS/PGM] button.
2. Dial a station number to receive the transfer.
3. When the other party answers, announce
4. Replace the handset.
Condition
1.
2.
2-10
Intercom Group Number (PGM 111-BTN 13)
Intercom Tenancy Group (PGM 120)
is denied, pick-up cannot be activated.
station numbers though they belong to
different intercom tenancy group.
any station in the system and it is not
affected by ICM Tenancy Group access.
sets Day/Night/Weekend mode, it will affect
only the ICM Tenancy Group.
intercom call is placed on exclusive hold.)
handset.
intercom call is placed on exclusive hold.)
the transfer.
It is possible to make intercom transfer in
SLT and WHTU.
The transferring party may be reconnected
with the original intercom call by dialing the
intercom station number, pressing the
associated {DSS} button or pressing the
LDK-
Intercom Features
(The
Advertisement
Table of Contents
