Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
announcement or inter-digit time (5sec) after
the announcement.
8. If the caller does not dial any digit within inter-
digit time (5sec) after VMIB announcement,
the call will be routed to the ring assigned
stations or disconnected after error tone.
9. Incoming
CCR
disconnected
after
announcement according to CCR program.
10. To use CCR feature for DID, VMIB should be
assigned for Flexible DID Destination (PGM
231).
11. If a user presses # button while CCR is
operated, the first system greeting will be
heard again. Press button to listen to the
previous system greeting.
12. An
incoming
call
programmed to be dropped after VMIB
announcement
if
programmed VMIB announcement according
to CCR programming.
13. If a call is routed by 'system speed dial' in
CCR, or Flexible DID table, the call will be
charged to the programmed station (same as
Incoming CO Off-net Call Forward).
14. System speed bin cannot be assigned in the
same bin number in the Flexible DID Table as
mixed entry for each day and night destination.
CHANGE KEYSET RING CADENCE
Description
The keyset ring cadence for intercom or CO line
ring may be reversed.
Admin Programming
n
Single Ring for CO line Call (PGM 161-BTN
7)
Condition
In NO mode,
SLT = ICM - 1sec ON, 4sec OFF
CO - 0.4 ON, 0.2 OFF, 0.4 ON, 4 OFF
Keyset = ICM - 0.8 ON, 2.4 OFF
CO - 0.4 ON, 0.4 OFF, 0.4 ON, 2 OFF
In YES mode,
call
will
be
served
programmed
with
CCR
may
"#"
is
inserted
SLT = ICM -0.4 ON, 0.2 OFF, 0.4 ON, 4 OFF
CO - 1sec ON, 4sec OFF
Keyset = ICM - 0.4 ON, 0.4 OFF, 0.4 ON, 2 OFF
CO - 0.8 ON, 2.4 OFF
or
CLI MESSAGE WAITING
VMIB
Description
The caller's number is displayed on the LCD of
the called party if 1) a DISA/DID call through ISDN
DID line is received or 2) in case of analogue CO
line, the line is in talk state or 3) a call of analogue
CO is not answered. If the caller hangs up the call
before answered by the called party or attendant,
be
the CLI (Calling Line Identification) will be left into
the original called party.
after
Operation
When a CO line ring is received at ISDN CO line,
1.
The phone number is displayed on the LCD
of ringing station.
2.
If it is not answered, the CLI is displayed on
the LCD.
MSG: CLI(3)
To retrieve the message,
1.
Press the [CALLBK] button to confirm the
message.
2.
Then the message (CLI number, date/time,
calling count from the same CLI) will be
shown on the LCD.
To delete the current message,
1. Press the [CONF] button.
2. Then the current CLI message is deleted and
the next CLI message is displayed.
To delete all CLI messages in a station,
1. Press the [CALLBK] button.
2. Press the [DND/FOR] button.
3. Press the [HOLD/SAVE] button.
To make a callback,
1. Press the [HOLD/SAVE] button.
2. An available CO line in the first accessible CO
group is seized and the number is dialed.
3-6
LDK-
System Features
Advertisement
Table of Contents
