Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
Condition
1. It is necessary to enter authorization code to
activate or deactivate Temporary Station COS
Change feature.
2. When a user changes the COS of his station
with 'Temporary COS Change' and tries to
access a CO line using "Walking COS" at the
other station, he will hear error tone.
Walking COS
Description
This feature allows to temporarily override toll
restriction and makes a toll call from toll restricted
phone. It is activated by entering a feature code
or pressing programmed [COS Override] button
and the authorization code before accessing a
CO line. The authorization code can be used as a
verified account code for SMDR.
Operation
To activate this feature from a keyset,
1. Press the [TRANS/PGM] button.
2. Dial 2 3.
3. Confirmation tone will be heard and enter the
authorization code.
4. If the authorization code is accorded, ICM dial
tone will be heard. (At this time, the used
extension COS is changed to the station's
COS
that
is
accorded
authorization code temporarily.)
5. You can place a CO line call only one time.
Admin Programming
n
Authorization Code (PGM 227)
Condition
1.
To program {COS OVERRIDE} Flexible
Button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM +
2 3 + [HOLD/SAVE]
2.
This feature can be used at keyset and SLT.
3.
This feature is available for only one time.
While you are activating this feature, if you
hang up or press the [TRANS/PGM] button
to hold the call and seize other line, then the
COS of extension used is recovered to
4.
5.
6.
DID (DIRECT INWARDS DIALING)
Description
This feature allows to access to specific stations
on specific DID lines f r om the public telephone
network, without going through an attendant
answering position.
When a DID is received at a busy station, the call
is waited in the station for DID/DISA Answer timer.
There are 3 types of DID Conversion and it can
be set by Admin Programming (PGM 143-BTN 4).
-
to
the
entered
-
-
Operation
1.
2.
3.
3-12
original COS.
When you dialed wrong number, press the
[FLASH]
button
to
changing CO line.
The fee for a call with Walking COS will be
charged the station which is accorded to the
authorization code, not the actual using
station.
When a user tries to make Walking COS to a
station which is set to COS 7 with temporary
COS, COS of the call will follow the original
COS of the station.
Type 0: In an incoming DID digits, select
some digits which are received digits by
Admin programming. The selected digits will
be converted by DID Conversion type (PGM
230).
Type 1: The incoming DID digits are the
destination number. There is no conversion.
Type 2: With result of DID Conversion type 1,
convert by the Flexible DID table (PGM 231)
additionally.
Receiving DID digits while DID remove
number is programmed, the DID digits will be
ignored as programmed count (00~99).
When the DID type is 0 or 2, the he received
DID digits are changed by DID Conversion
Table (PGM 230).
The converted DID digits indicate the index of
DID table (000~999). The DID index will route
the
DID
call
to
LDK-
System Features
dial
again
without
the
preprogrammed
Advertisement
Table of Contents
