Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
AUTHORIZATION CODE (PASSWORD)
Description
This feature provides a means for limiting access
to specified CO lines by stations and DISA users.
To access a CO line, a user should input a valid
authorization code matching an authorization
code stored in the system. Authorization code can
be used as a verified code for SMDR, a DISA
account code, or both if system DISA verifying
flag is assigned with station base. Authorization
code may be assigned by station or Admin.
Programming.
Operation
To access a CO line when authorization codes are
required,
1. Attempt a CO line access, and DND warning
tone is heard.
2. Enter the authorization code (5 digits).
3. If valid, the CO line is connected and if not
valid, you will hear error tone.
Admin Programming
n
Authorization Code (PGM 227)
n
DISA Account Code (PGM 141-BTN 3)
n
CO Line Group Account (PGM 141-BTN 9)
n
4) Loop LCR ACNT (PGM111 – BTN 16)
Condition
1.
The total number of authorization code in the
system is
60
in LDK-24.
2.
The same authorization code cannot be
assigned.
3.
To register the authorization code in a station,
[TRANS/PGM] + 3 1 + authorization code +
[HOLD/SAVE]
4.
To change the authorization code in a station,
[TRANS/PGM] + 3 2 + current authorization
code + new authorization code + [HOLD/SAVE]
5.
If Loop LCR ACNT is set about a station, the
authorization code is required when the station
dials Loop LCR CO Access code
AUTO CALL RELEASE
Description
When a station does not initiate dialing on an
outgoing CO line or receive no answer on an
intercom call, the system will return the CO line
or the called station to idle based on the
assigned Auto Release Timer. If i n the speaker
phone/monitor mode, the station will return to
idle, otherwise, the station will receive error tone
if using the handset.
Admin Programming
n
CO Call Auto Release Timer (PGM 180-BTN
14)
n
Intercom Call Automatic Release Timer (PGM
182-BTN 5)
Condition
1. Intercom call in H/P mode is regarded that it is
answered and Station Auto Release is not
activated.
2. When the Automatic Release time is assigned
to 0, Auto Call Release is not activated.
3. While making a call without lifting handset and
Auto Release timer is expired, the call is
canceled and the station will go idle state
automatically.
4. While making a call with lifting handset and
the Auto Release timer is expired, the call is
canceled and the station will receive error
tone.
AUTOMATIC CALL DISTRIBUTION
Description
A separate or common supervisor can be
assigned in UCD group. And, the supervisor can
monitor the status of the group. When a call is
queued to a group for longer than a predefined
time or when a predefined number of calls are
queued, the supervisor's LCD will indicate the
number of calls in queue, and the queued time for
the longest queue. The supervisor can change
overflow destination and timing. The system will
provide traffic and on line status reports, based on
3-3
LDK-
System Features
Advertisement
Table of Contents
