Figure 4-6 G4 Ex Board - ABB XSeries G4 6200 User Manual

10) After the LCD board is disengaged, gently remove the lithium battery
11) Upon removal of the lithium battery connector, gently snap the board out of
12) Unplug the sensor connector cable (J6) and the ribbon cable (J1) from the
2104349 rev. AD
Potentiometer
R1
CONTRAST
SD CARD
1 1
SD CARD
J3
JTAG
J4
Primary Component Side
Figure 4–6 G4 EX board
connector (J5) from the G4 EX board.
the device. Please note that the board is still connected to the device
through the cables in the back.
G4 EX board (see Figure 4–7). Remove the board from the G4 EX device.
J2
16 16
XA1
L1
Processor Card
J5
LITHIUM
Lithium Battery
Connector
Page 4–11