Table 1-5 G4 Ex Main Processor Board Specifications; Figure 1–6 G4 Ex Main Processor Board - ABB XSeries G4 6200 User Manual

1.2.2.1
An engine card plugs into the G4 EX board. All processor and memory
components reside on this engine card. The engine card uses a low power
processor running at 203 MHz with 16MB PSRAM for program execution and data
storage, 32MB Flash for application storage and 256 bytes of serial E
lithium backup battery is located on the main G4 EX board. Application programs
and configuration files are stored in non-volatile Flash.
1.2.2.2
The G4 EX main processor board is designed as a general purpose motherboard
for the 6200/6201EX devices.
Component
Power
External Power
Charger
Memory
Comm. Ports
2104349 rev. AD
Figure 1–6 G4 EX main processor board
Engine card
G4 EX main processor board specifications
Table 1–5 G4 EX main processor board specifications
Description
9 to 30 VDC
SWVBAT: 1 fused with 2.5 amp PTC
VBAT: 1 fused with 2.5 amp PTC
No Charger
Application (Totalflow.exe) runs out of 16M SRAM. RAM memory has lithium
backup battery.
Application and configuration files permanently stored in 32M Flash.
Registry (MAC address, etc.) is stored in 256 byte E
SD Card optional (512M/1G)
6 Ports Available
Dedicated PCCU/MMI (RS-232 or USB)
2 Onboard User Programmable RS-232/RS-422/RS-485 Ports
USB (Client)
NOTE: A special cable is required, and the user must check with Totalflow for a
list of drivers to support Client peripherals.
Ethernet Bluetooth – Standard on the Main Electronics board
2
PROM. A
2
PROMSD Card
Page 1–11