Figure 1-2 Liquid Crystal Display (Lcd) And Indicators; Table 1-3 Default Annunciator Locations; Table 1-4 G4 Ex Status And Alarm Description - ABB XSeries G4 6200 User Manual

In the G4 EX computer, the status and alarm indicators are user programmable.
Table 1–3 identifies the default annunciator locations. Please consult the PCCU32
Help Files for additional instructions on programming the annunciators.
Whenever an alarm is indicated, the G4 EX records it in the appropriate log period
flow record. These are automatically retrieved when data is collected. Visual
alarms and status codes are described in Table 1-4.
Table 1–3 Default annunciator locations
Annunciator
A1
A2
A3
A4
A5
A6
A7
A8
Indicator Description
LL Low Lithium Battery Alarm: When LL (low lithium) is displayed, lithium battery voltage is not
sufficient to maintain SRAM data. A new lithium battery measures approximately 3.6 VDC.
1 A number represents the Display Group number currently being displayed.
The displayed item's value is above the Data High Limit value specified on the display Item
↑
Setup screen.
The displayed item's value is below the Data Low Limit value specified on the display Item
↓
Setup screen.
Page 1–6
Figure 1–2 Liquid Crystal Display (LCD) and indicators
Application
Measurement Tube 1
CIM 0
Valve Control
COM2
Plunger
Local-COM0
System
TF Remote – COM1
Table 1–4 G4 EX status and alarm description
System
Display Application
2104349 rev. AD