Figure 3-9 Communication Setup - ABB XSeries G4 6200 User Manual

5) While still in PCCU32, the user needs to click the Operate selection on the
6) Within the System Setup dialog box (see Figure 3–10), click the TCP/IP
7) Upon finishing, click the Close button.
2104349 rev. AD
Figure 3–9 Communication setup
main PCCU32 toolbar. From the drop-down menu, select Setup. From the
fly-out menu, select System Setup.
radio button. Next, enter the network ID or IP address for the meter in the
corresponding parameter field. The network ID is the same ID that the user
entered earlier within the meter setup.
Page 3–9