Figure 3-10 System Setup Window - ABB XSeries G4 6200 User Manual

8) Exit PCCU32 and the local connection.
9) With the Ethernet cabling installed, connecting to the meter is no different
10) Create a desktop shortcut, and assign a name to it. For the sake of the
11) The user will now need to point to the version of PCCU32 that they want to
12) The user will then need to identify the network protocol to be used (TCP)
Page 3–10
Figure 3–10 System Setup window
than when using the PCCU cable or military connector. Click on the
Connect to Totalflow icon in the PCCU32 toolbar. To connect and move
directly to Entry mode, click on Entry instead of the Connect icon.
If the user has several meters on their network, they may find it
helpful to create a desktop shortcut for each meter. For
instructions on how to accomplish this task, follow steps 10 – 12;
otherwise, the user may continue on to the next section.
example, the following will use the meter's ID for the shortcut name.
use (the user may have multiple versions of PCCU32 on their laptop). It
should be noted that it must be PCCU32 version 7.05.5 or later.
and the network ID (see Figure 3–11).
For example:
- Point to the folder with PCCU32 in it.
- Point to PCCU32.exe.
- Point to the protocol (TCP).
2104349 rev. AD