Adding Credits To The Credit Key By Telephone; Figure 3-29 Application Credit Key Entry Screen - ABB XSeries G4 6200 User Manual

3.5.3 Adding credits to the Credit Key by telephone

The user may have ordered the credit key from Totalflow with a specified number
of the various credits; however, the user may need to add more or different credits
in the future.
1) Open PCCU32 version 7.0 or later, but do not connect to the unit.
2) Go to the Credit Key License Utility (Operate > File Utilities > Credit Key
3) Insert the credit key into an available USB port.
4) Select Do Phone Update (see Figure 3–28).
5) The user is then asked to call Totalflow Order Entry. Insure that the credit
6) Upon connection with a Totalflow Order Entry representative, click the OK
7) The representative will ask the user to read the five (5) encrypted codes that
8) The representative will give the user four codes to enter in the provided
9) After the codes have been entered (from top to bottom), click the Update
10) After the button has been clicked, three more codes are displayed directly
11) When completed, click the Update button.
2104349 rev. AD
License Utility).
key is plugged in.
button.
appear directly beneath the Do Phone Update button. Read them from top
to bottom (see Figure 3–29).
Figure 3–29 Application Credit Key entry screen
fields.
button (see Figure 3–30).
beneath the Do Phone Update button. The Totalflow representative will ask
the user to read the codes to verify that the credits have been properly
written to the credit key.
Page 3–27