Display Assembly; Resistive Temperature Detector (Rtd); Figure 1-16 Liquid Crystal Display (Lcd) Assembly - ABB XSeries G4 6200 User Manual

DP Zero per 1500 psi:
SP effect
DP Span per 1500 psi:
Operating range -80F to 750F (-62C to 339C)
± 0.35F (± 0.2C)over operating range (as shipped from factory)
Accuracy
± 0.2F (± 0.12C) repeatability over operating range (after single point field calibration)

1.2.5 Display assembly

The G4 EX display assembly (see Figure 1–16) has a dedicated interface to the
main processor board from the 4x16 LCD via a 14-pin connector.
The display utilizes four lines by 16 characters. The user can then customize the
annunciators based on their own specific needs. The alarm codes and
annunciators communicate a basic message(s) to the user and indicate a need for
further attention. These codes are location dependent and may mean different
things, based upon which character space the code appears in. These are also
user configurable.

1.2.6 Resistive temperature detector (RTD)

Totalflow offers a choice of two RTD options. The 100 OHM Platinum RTD
measures real-time flowing temperature of the gas.
1.2.6.1
The standard RTD is not DIV 1 approved; therefore, this RTD may only be
installed and used in general purpose areas.
2104349 rev. AD
± 0.03% of URL (3200 psi maximum)
± 0.1% of Reading (3200 psi maximum)
Temperature
Figure 1–16 Liquid Crystal Display (LCD) assembly
Standard RTD
Page 1–19