Connecting To Local Usb Port; Figure 3-2 Windows Found New Hardware Wizard - ABB XSeries G4 6200 User Manual

4) The Local Connect screen displays six buttons. From the button selections,

3.2.2 Connecting to local USB port

If the user's unit is configured to include the local USB communication port, the
connection is made using the USB cable. This connects the laptop computer to
the Local port on the meter.
Before the user is able to communicate to the G4 EX using a USB cable, they
must install the Totalflow USB driver: Totalflow.inf.
3.2.2.1
1) If the G4 EX and laptop are powered up when the connection is made, the
2) To install Totalflow.inf, select the Install from a list or specific location (i.e.,
3) Select the Include this location in the search checkbox. Browse to the
2104349 rev. AD
click Entry Setup to move to the Station Setup screen. Links within the
PCCU32 tree-view will move the user to screens for setup and daily
operations.
Step-by-step instructions
user will receive the Found New Hardware Wizard screen (see Figure 3–2).
When this screen displays, the user needs to select the No, not this time
radio button. Click Next.
Figure 3–2 Windows found new hardware wizard
the PCCU32 folder) radio button (see Figure 3–3). Click Next.
PCCU32 folder. In Figure 3–4, the folder was named PCCU605 to draw
attention to the necessity to run PCCU32 version 7.05.5 or later with the G4
EX. After browsing to the folder that contains the Totalflow.inf, click the Next
button.
Page 3–3