Role Based Access Control (Rbac); Figure 3-16 Winccu32 Edit A Device Id Dialog Box - ABB XSeries G4 6200 User Manual

The security code level 2 of 5678 (per Figure 3–16) has been entered. This gives
the WinCCU32 user full read/write access to the meter.

3.4.3 Role Based Access Control (RBAC)

Role Based Access Control (RBAC) is a feature in PCCU32 that is designed to
allow an administrator to designate roles and control access levels to various
applications and processes in G4 devices.
Beginning with a set of default roles, it is possible to duplicate, rename and delete
these items to create a working list of access roles that are relevant to the user's
company hierarchy. From this role list, it is then possible to create user accounts
with various assigned roles. The user is also given the ability to take the newly
created configuration and save it in the form of a security file to their PC. The
security file can then be sent to a G4 device, where it is then implemented.
3.4.3.1
RBAC configurations can be defined and saved in a security file. This mainly
includes Role Definition, User Configuration and Port Configuration.
The following instructions provide information for creating and editing a security
file.
2104349 rev. AD
Figure 3–16 WinCCU32 Edit a Device ID dialog box
Modbus access to the meters is not protected by the security
codes.
RBAC is enforced by both the device and the PCCU32
interface for G4 devices. Enforcement on devices is on a
port-by-port basis. When RBAC is enforced, type 1 and 2
security is superseded.
Security file configuration
Page 3–17