Communication Objects Function Sequence - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.3.9

Communication objects function Sequence

If the additional function Slave is selected in the
communication objects appear.
No.
41, 49...
153, 161
This communication object is enabled if in
enabled.
This communication object is used for activation/deactivation of the function Sequence.
With deactivation, the lighting group behaves like a "normal" lighting group of the group-orientated DGN/S without function
Sequence. The function Sequence can be reactivated, if a telegram with the value 1 is received on the DGN/S via this object.
By setting the T flag, the communication object is actively sent after KNX voltage recovery.
Telegram value:
As long as function Sequence is activated, the Sequence time curve is initiated by a telegram with the value 1 to one of both
communication objects Switch or Switch/status.
In the Parameter window - Gx Sequence
scene telegram interrupts the function Sequence.
For further information see:
41, 49...
153, 161
This communication object is enabled if in
and simultaneously in
the lighting group is programmed with the option yes: via object "Activate sequence/sStatus".
In this case, the status of the function Sequence is sent via this communication object on the KNX in addition to the functions
described above.
1)
The numbers of the communication objects apply for lighting groups 1...16.
Function
Activate function sequence
1)
Parameter window Gx
0 = Sequence is deactivated, current brightness is retained
1 = Sequence is activated and started simultaneously
on page 74, you can parameterize if a switch, brightness value, relative dimming or
Parameter window
Activate sequence/status
1)
Parameter window Gx
Parameter window - Gx
Parameter window Gx
Communication object name
Group x
Group, page 51, the additional function Sequence is
Sequence, page 87, or Sequence, page 142
Group x
Group, page 51, the additional function Sequence is enabled
Sequence, page 74, the parameter Status response of function Sequence of
Group, page 51, the following
Data type Flags
1 bit C, W
DPT 1.003
1 bit C, W, R, T
DPT 1.003
DGN/S 1.16.1 | 2CDC 507 114 D0201 127