Parameter Window - Gx Slave - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.2.7

Parameter window - Gx Slave

The parameter window Gx Slave is enabled in
lect additional function has been set to the option Slave.
With operating function Slave, the lighting follows the brightness value provided by the master via the
communication object Brightness value of slave. The reaction to switch, dim or brightness value telegrams
can be parameterized individually.
Using the function Slave, every individual lighting group of the DGN/S can be integrated into a constant
lighting control which is implemented, for example, by an ABB i-bus
master.
If in the following, the communication object Switch or Brightness value is mentioned, the details apply for
the communication objects Switch/status or Brightness value/status.
If the function Slave is parameterized, a standby type state exists after a download. The brightness value
from the communication object Brightness value of slave is used by the DGN/S after a switch ON telegram
(communication object Switch), which is generally sent by a master, read and used for control of a lighting
group.
Hinweis
Is a central command e.g. switch, dimming or set brightness received via communication object DALI
output, the slave crried out the central command. The slave listen still to communication object slave
brighness value of slave.
For further information see: Slave, page 139
Dim period to reach set brightness value
in s [0...65,535]
Options:
This parameter determines the time duration, in which the DGN/S sets the brightness value from the com-
munication object Brightness value of slave for the lighting group, when activating the function Slave.
70 2CDC 507 114 D0201 | DGN/S 1.16.1
0...2...65535
Parameter window Gx Group, page 51, the parameter Se-
®
Light Controller LR/S x.16.1 as a