Parameter Window Cx - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.6.1 Parameter window Cx...Cy Converter
In this parameter window, the behaviour of an emergency light with the DALI emergency lighting converter
to EN 62 386-202 is parameterized for a self-contained emergency lighting.
Set brightness value for fct. emergency
Options:
via ETS: The brightness value of the emergency lighting with emergency lighting converters is param-
eterized in the ETS. The next parameter is provided for this purpose.
via config Tool: The brightness value of the emergency lighting with emergency lighting converters is
parameterized using the DALI-Software-Tool. The actual brightness required in emergency lighting
operation can be set and saved experimentally here.
Note
The function to set the emergency must be supported from emergency converter.
Each setting via ETS or the DALI-Software-Tool can only be made separately. A setting with both
options has been intentionally avoided in order to ensure that the setting can be uniquely identified.
With the option via ETS, a further parameter appears:
Converter emergency brightness value
Options:
The DALI value 255 is defined for an emergency lighting converter as a non-defined brightness va-
lue. As the digital DALI brightness values of the DGN/S are transferred directly onto the KNX, there
is no useful digital KNX brightness value of 255. The maximum brightness value is 254.
92 2CDC 507 114 D0201 | DGN/S 1.16.1
via ETS
via config Tool
100 % (254)
...
1 % (3)
100 % (254)...1 % (3): Brightness value that the lighting group switches on in emergency light-
ing operation.