Parameter Window Scene X - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.4

Parameter window Scene x

In parameter window Scene x (x = 1, 2...14), the general settings for the light scenes are undertaken. The
parameter window Scene x is enabled if in
enabled.
A scene value must be assigned in order to set a scene value for the lighting group. The scene value
complies with the brightness value, which the lighting group assumes when the scene is recalled.
Transition time for scene
Options:
This parameter sets the duration, in which the scene retrieval of the dimming process for all lighting groups
of the scene are completed together. If the dimming process is completed, the lighting groups of the scene
have achieved the parameterized brightness value of the scene.
jump to
0.7 s
2 s
...
90 s
Parameter window Scenes, page 84, the required scenes are
DGN/S 1.16.1 | 2CDC 507 114 D0201 85