ABB i-bus KNX Product Manual page 180

®
ABB i-bus KNX
Parameters
7.11.1.4.1 —
Dependent parameter
Temperature sensor type
Options:
This parameter indicates which type of temperature sensor is connected. Please refer to the sensor's
datasheet for technical information. The measurable range for each type of sensor appears in square
brackets after the type.
•
NTC: Selecting this type of sensor opens the dependent parameter window NTC type so that you can
select an NTC subtype.
•
KTY: Selecting this type of sensor opens the dependent parameter window KTY type so that you can
select a KTY subtype:
7.11.1.4.1.1 —
Dependent parameter
NTC type
Options:
This parameter allows you to choose the NTC sensor type that is connected. An NTC10 sensor has
a resistance of 10 kohms at 25 °C. An NTC20 has a resistance of 20 kohms. Individual types vary in terms
of their resistance curves.
178 2CDC508220D0211 Rev. A | VC/S 4.x.1
PT100 [-30...+110 °C]
PT1000 [-30...+110 °C]
NTC
KTY [-15...+110]
NI1000 - 01 [-30...+110 °C]
NI1000 - 02 [-30...+110 °C]
NTC10-01 [-15...+100°C]
NTC10-02 [-15...+100°C]
NTC10-03 [-15...+100°C]
NTC20 [0...+100°C]