Product Overview - ABB i-bus KNX Product Manual

®
ABB i-bus KNX

Product Overview

3 Product Overview
3.1 Product Overview
The devices are of type modular DIN rail component (MDRC) in Pro M design. The module width of the
devices is six space units. They are designed for installation in distribution boards on 35 mm mounting
rails.
The devices are powered by the bus and require no additional auxiliary voltage supply. The device
connects to the
Engineering Tool Software (ETS) is used for physical address assignment and parametrization.
The device is ready for operation after connecting the supply voltage.
Abbreviation
V
C
/S
x
x
x
Table 2: Product name description
Manual operation
Contact scanning or temperature
sensor
Analog room control unit
Electronic valves
(PWM)
Table 3: Product Overview
®
ABB i-bus KNX via the front bus connection terminal.
Description
Valve drive
Controller
MDRC
4 = 4-fold
1 = Without manual operation
2 = With manual operation
x = Version number (x = 1, 2 etc.)
VC/S 4.1.1
x
x
x
x
VC/S 4.2.1
x
x
x
x
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 9