®
ABB i-bus
KNX
Maintenance and cleaning
10
Maintenance and cleaning
10.1
Maintenance
The device is maintenance-free. In the event of damage, e.g. during transport and/or storage, repairs are
not allowed to be made.
10.2
Cleaning
Disconnect the device from the supply of electrical power before cleaning. If devices become dirty, they
can be cleaned using a dry cloth or a cloth dampened with a soapy solution. Corrosive agents or solutions
must never be used.
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 227