Assigning Via Web License Manager; You Can Execute An Assignment Via Direct Access As Follows - Siemens SINUMERIK 840D sl Commissioning Manual

14.8

Assigning via Web License Manager

14.8.1

You can execute an assignment via direct access as follows

Background
For the direct access, log on to a computer connected to the Internet (PC/PG) with the
delivery note and license number in the Web License Manager. All licenses of the delivery
note numbers entered at the login may then be assigned to a piece of hardware. After
completing the assignment process, the new License Key is displayed. This must then be
entered in the licensing dialog of the HMI components used.
Requirements
The following prerequisites must be met in order to assign a license to a piece of hardware
via direct access and HMI user interface:
● The HMI component is connected with the control system (NCU) on which the license
● A computer (PC/PG) with Internet connection and browser is available.
● The login data for the direct access (e.g., per CoL) are available:
Assigning a license to a piece of hardware
1. Determine the hardware serial number and the product name (HMI Advanced/HMI
2. Go to the Internet page of the Web License Manager:
3. Login via "Direct access":
4. Follow the additional instructions in the Web License Manager.
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
should be assigned. Both components have been booted.
– License number
– Delivery note number
Embedded: "Hardware type") via the HMI licensing dialog box.
HMI Advanced/HMI Embedded:
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
Note
Ensure that the hardware serial number displayed is also really the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager.
http://www.siemens.com/automation/license
– License number
– Delivery note number
14.8 Assigning via Web License Manager
Licensing
271