Commissioning communication NCK<->Drive
9.3
Commissioning communication NCK<->Drive completed
Commissioning communication NCK<->PLC completed
You have placed the following in operation:
● PLC
● SINAMICS drives
● Communication NCK-PLC
The basic commissioning is completed. Now you can move the axes.
The next chapter, "Commissioning NCK", describes the parameterization of NCK regarding
the connected machine by setting system variables.
100
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive