Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
1. Press the "Drives" softkey in order to configure the following drives (SERVOs):
The drive wizard identifies the relevant design of the drives and guides you through the
configuration in the dialog.
80
– Drive with listed motor and encoder via SMC (without DRIVE-CLiQ)
– Drive with third-party motor and additional second encoder via SMC (without DRIVE-
CLiQ)
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive