Siemens SINUMERIK 840D sl Commissioning Manual page 77

Figure 8-22
Figure 8-23
6. This completes the configuration for the infeed. You can check the configuration in the
7. Press the "Finish >" softkey.
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
Menu "Infeed > Configuration" "BICO terminal wiring" (Next 3)
Menu "Infeed > Configuration" "Summary" (Next 4)
summary.
Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
77