Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
Figure 8-50
23. The configuration of the drive (SERVO) with third-party motor is completed. You can
check the configuration in the summary.
24. Press the "Finish >" softkey.
Figure 8-51
25. Confirm the query with "Yes".
94
Menu "Drives > Configuration" "Summary" (Next 9)
Menu "Drives > Configuration" "...save permanently..." (Finish)
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
IBN CNC: NCK, PLC, drive