Fio_11_Dio_Slot1; Fio_11_Dio_Slot2 - ABB ACSM1 Firmware Manual

FIO_11_DIO_slot1

(10086)
Illustration
Execution time
Operation
Inputs
Outputs

FIO_11_DIO_slot2

(10087)
Illustration
Execution time
FIO_11_DIO_slot1
TLA1 1 msec
DIO1 conf
DIO2 conf
DO1
DO2
DI1 filt gain
DI2 filt gain
6.0 µs
The block controls the two digital inputs/outputs (DIO1, DIO2) of a FIO-11 Digital I/O
Extension mounted on slot 1 of the drive control unit.
The state of a DIOx conf input of the block determines whether the corresponding DIO
on the FIO-11 is an input or an output (0 = input, 1 = output). If the DIO is an output, the
DOx input of the block defines its state.
The DIx outputs show the state of the DIOs.
The DIx filt gain inputs determine a filtering time for each input as follows:
DIx filt gain Filtering time
0 7.5 µs
1 195 µs
2 780 µs
3 4.680 ms
Digital input/output mode selection (DIO1 conf, DIO2 conf): Boolean
Digital output state selection (DO1, DO2): Boolean
Digital input filter gain selection (DI1 filt gain, DI2 filt gain): INT
Digital input/output state (DI1, DI2): Boolean
Error output (Error): DINT (0 = No error; 1 = Application program memory full)
FIO_11_DIO_slot2
TLA1 1 msec
DIO1 conf
DIO2 conf
DO1
DO2
DI1 filt gain
DI2 filt gain
6.0 µs
55
(1)
DI1(55)
DI1
DI2(55)
DI2
Error(55)
Error
56
(1)
DI1(56)
DI1
DI2(56)
DI2
Error(56)
Error
269
Standard function blocks