Group 02 I/O Values; Group 03 Control Values - ABB ACSM1 Firmware Manual

Group 02 I/O VALUES
This group contains information on the I/Os of the drive.
02
02 I/O VALUES
2.01 DI STATUS
Status word of the digital inputs. Example: 000001 = DI1 is on, DI2 to DI6 are off.
2.02 RO STATUS
Status of relay output. 1 = RO is energized.
2.03 DIO STATUS
Status word of digital inputs/outputs DIO1...3. Example: 001 = DIO1 is on, DIO2 and DIO3 are off.
2.04 AI1
Analogue input AI1 value in V or mA. The type is selected with jumper J1 on the JCU Control Unit.
2.05 AI1 SCALED
Scaled value of analogue input AI1. See parameters
SCALE.
2.06 AI2
Analogue input AI2 value in V or mA. The type is selected with jumper J2 on the JCU Control Unit.
2.07 AI2 SCALED
Scaled value of analogue input AI2. See parameters
SCALE.
2.08 AO1
Analogue output AO1 value in mA
2.09 AO2
Analogue output AO2 value in V
2.10 DIO2 FREQ IN
Frequency input value in Hz when DIO2 is used as frequency input
FREQ
2.11 DIO3 FREQ OUT
Frequency output value in Hz when DIO3 is used as frequency output
FREQ
FW block:
FW block:
FW blocks:
FW block:
FW block:
FW block:
FW block:
FW block:
FW block:
FW block:
INPUT).
FW block:
OUTPUT).
DI (page 84)
RO (page 84)
DIO1 (page 82), DIO2 (page 82),
AI1 (page 86)
AI1 (page 86)
13.04 AI1 MAX SCALE
AI2 (page 87)
AI2 (page 87)
13.09 AI2 MAX SCALE
AO1 (page 90)
AO2 (page 91)
DIO2 (page 82)
DIO3 (page 82)
Parameters and firmware blocks
DIO3 (page 82)
and 13.05 AI1 MIN
and 13.10 AI2 MIN
(12.02 DIO2 CONF is set to
(12.03 DIO3 CONF is set to
57
(2)
(2)