ABB ACSM1 Firmware Manual page 85

12.13 DI INVERT MASK
Inverts status of digital inputs as reported by
inverts the status of DI3 in the signal.
0b000000...0b111111
12.14 DIO2 F MAX
Defines the maximum value for frequency input (when
3...32768 Hz
12.15 DIO2 F MIN
Defines the minimum value for frequency input (when
3...32768 Hz
12.16 DIO2 F MAX SCALE
Defines the real value that corresponds to the maximum frequency input value defined by
parameter 12.14 DIO2 F
DIO2 (Hz)
12.14
12.15
12.17
-32768...32768
12.17 DIO2 F MIN SCALE
Defines the real value that corresponds to the minimum frequency input value defined by
parameter 12.15 DIO2 F
-32768...32768
FW block: DI (see above)
2.01 DI
DI status inversion mask.
FW block: DIO2 (see above)
Maximum DIO2 input frequency.
FW block: DIO2 (see above)
Minimum DIO2 input frequency.
FW block: DIO2 (see above)
MAX.
DIO2 (real)
12.16
Real value corresponding to value of parameter 12.14.
FW block: DIO2 (see above)
MIN. See parameter 12.16 DIO2 F MAX
Real value corresponding to value of parameter 12.15.
STATUS. For example, a value of 0b000100
12.02 DIO2 CONF is set to
12.02 DIO2 CONF is set to
DIO2 (Hz)
12.14
12.15
12.16 12.17
SCALE.
Parameters and firmware blocks
85
(2) FREQ INPUT).
(2) FREQ INPUT).
DIO2 (real)