Firmware Blocks - ABB ACSM1 Firmware Manual

54
Note: Pointing to a nonexisting bit will be interpreted as 0 (FALSE).
For additional parameter data, e.g. update cycles and fieldbus equivalents, see
chapter

Firmware blocks

Firmware blocks accessible from the DriveSPC PC tool are described in the
parameter group most of the block inputs/outputs are included in. Whenever a block
has inputs or outputs outside the current parameter group, a reference is given.
Likewise, parameters have a reference to the firmware block they are included in (if
any).
Note: Not all parameters are available through firmware blocks.
5
1 Inputs
2 Outputs
3 Input parameter values
4 Pointer parameter indicator "<"
5 Parameter 26.01 is set to value P.1.1, i.e. signal 1.01 SPEED ACT. The "7" means the signal can be
found on page 7 of DriveSPC.
6 ID of the time level (TL4) and time level (250 µs). Time level, i.e. update cycle, is application-specific.
See the time level of the block in DriveSPC.
7 Firmware block ID number in the application program
8 Firmware block execution order for the selected update cycle ID
Parameters and firmware blocks
Parameter data.
6
7/)  —VHF
1
3
4
63((' $&7
 63((' $&7 1&75/
  
63(('5() 5$03('
 63((' 5() 1&75/
  
63((' 5() 326
 63((' 5() 3&75/
  
63((' )((' ):'
 63((' )((' 3&75/
  
'ULYH YDOXH
'ULYH YDOXH
'ULYH YDOXH
'ULYH YDOXH
'ULYH YDOXH
63((' (5525
 63(('5() 86('
 63((' (5525 ),/7
 $&& &203 7254
 63((' 67(3
 63((' (55 )7,0(
 63((' :,1'2:
 $&& &203 '(57,0(
 $&& &203 )7,0(
7

8

2