Settings - Siemens SIMATIC MV500 Operating Manual

Reader status and access status
The reader status shows the current status of the reader.
Table 3- 1
Icon
Start
Stop
Edit
Adapt
The access status shows the current status of the WBM.
Table 3- 2
Icon
Red padlock
Blue padlock
Red/gray padlock
Green padlock
Standard view
Use the Standard view to switch between Standard and Extended view. In the Standard
view, the operator controls that are not required for standard applications are grayed out. If
the Standard view is disabled, extended parameters are released for editing.
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Reader status
Description
The reader has the "Start" status. This means that the device is currently
in processing mode (RUN).
The reader has the "Stop" status. This means the device is currently nei-
ther in processing mode nor in productive mode. There is no operation
(STOP).
The reader has the "Edit" status. This means the device is currently in edit
mode and changes can be made to the configuration.
The reader has the "Adapt" status. This means the device is currently in
adaption mode. This mode is started either by the "READ" button or by
the "Full program" function in the program step "Overview > Auto-
adaption".
Access status
Description
Operation is not possible in the "Read only" status because the WBM of
another PC is currently in control of the optical reader.
The logged-on user is not authorized to change settings.
DISA is active. Only users that have the "Take control" right are capable
of taking over control of the optical reader from the controller.
The currently logged on user has taken control of the optical reader.
Description of the WBM
3.1 Layout of the WBM
11