Siemens SIMATIC MV500 Operating Manual page 20

Application
5.1 Program
Button
Save program as
Delete program
Edit program
Start program
Stop program
Note that the program sequence part of the toolbar is only shown when the "Program sequence" option was activated
1)
under "Settings > Options > Extras > Program sequence".
20
Description
Number
•
In this text box, enter the program number under which you want to save the current
program.
Value range: 1 ... 15
Name
•
In this text box, enter the name under which you want to save the current settings and
the program. This entry is optional.
Possible values: Letters, numbers and underscores. Maximum of 255 characters.
Comment
•
In this text box, you can enter your own program-specific information, for example.
Among other things, this is intended to make it easier for you to identify the individual
programs.
Wait for next image acquisition
•
Select this check box when you do not want to save the current image but the next
image.
Save program as
•
Click this button to save the current settings and the program with the specified name.
Discard changes
•
Click this button to discard the changes you have made since the program was saved
last. If the program was newly created and has not been saved since, it will not be
saved and will be lost.
Cancel
•
Click this button to close the menu without applying the changes.
Click this button to delete the selected program ("Program" drop-down list).
Click this button to edit the selected program ("Program" drop-down list).
Click this button to start the selected program ("Program" drop-down list).
Click this button to stop the selected program ("Program" drop-down list).
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500