Siemens SIMATIC MV500 Operating Manual page 26

Application
5.1 Program
When adaption is complete, the reader automatically switches to edit mode ("Edit").
Depending on the result of the adaptation, the following steps are performed:
● NOK
The status display shows a message with detailed information and further instructions on
the adaptation result and the possible causes for "NOK".
● OK
The reader switches to the "Result" program step and enables formation of result. The
status display shows a message with detailed information and further instructions on the
adaptation result. The changes are applied to the currently selected program. To save
these changes, you must manually save them in the desired target program.
26
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500