System - Siemens SIMATIC MV500 Operating Manual

Device

7.2 System

Post-editing a CSV file with Microsoft Excel
Problem
When you open a CSV file with Microsoft Excel, depending on the Excel version you are
using, you may find that all values are displayed in a single column next to each other.
Solution
To change the data to the correct format, follow these steps:
1. Select the entire column by clicking on the column header.
2. Start the conversion wizard by selecting "Data > Text to columns ...".
3. Select the "Delimited" option button and click "Next".
4. Specify the character to be used as the delimiter (for example semicolon) and the
character to be used as text qualifier (for example ").
A data preview shows you the result you can expect.
5. If you also want to specify the data format for the individual columns, click "Next" again.
6. Finally, click on the "Finish" button to convert the table to the required format.
7.2 System
In the "System" menu, you can make the following settings:
● Saving, restoring and deleting settings, programs and system images
● Updating firmware and resetting the reader to the delivery state
● Saving and loading CustomGUIs
Note
Saving diagnostic images located in the reader memory
If you use the "Backup/save", "Restore" and "Firmware update" functions, any diagnostic
images in the memory of the reader are deleted.
If required, save the diagnostic images before you use these functions.
142
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500