Siemens SIMATIC MV500 Operating Manual page 146

Device
7.2 System
Factory settings
You can reset the optical reader to the factory settings with this function. This process will
reset all parameters to their default values. All saved programs as well as the loaded
CustomGUI are deleted and the example CustomGUI is restored.
Table 7- 5
Menu command or
parameter
Settings and pro-
grams
CustomGUI
Save
You can save the CustomGUI currently used in the reader to a connected PC with this
function (folder: "Favorites > Downloads").
Load
With this function, you can replace the CustomGUI currently used in the reader with a saved
CustomGUI.
146
Relationships and dependencies of the parameters
Dependency
Calibrate
Description
Remember the following if you use the reader
as a verifier:
The calibration of a reader depends largely
•
on the lighting used, the lens and the me-
chanical arrangement.
After restoring the settings and programs,
•
you must repeat the calibration operation
for all restored calibrations.
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500