Siemens SIMATIC MV500 Operating Manual page 144

Device
7.2 System
The following table provides an overview of the parameters in the "Settings >
Communication > Interface" menu on which the enabled settings have an effect.
Table 7- 4
Enabled settings
TCP/IP settings
PROFINET IO settings
Serial interface settings
This setting also has an effect on the PROFINET IO I&M data that is written via the controller.
1)
Delete
Use this function to delete existing MV500 XML parameter files stored on the micro SD card.
System image
Use this function to transfer a diagnostics package to the connected PC in the event of a
problem (folder: "Favorites > Downloads"). Internal processes of the reader are saved in the
diagnostics package. The diagnostics package is required for service support by Siemens
specialists.
144
Effect of the enabled settings
1)
Affected parameters
Ethernet
•
– IP mode
– IP address
– Subnet mask
– Gateway
TCP
•
– IP address
– Port
– Time limit
Archiving/MMI
•
– IP address
– Port
– Time limit
Ethernet
•
– IP mode
– Host name
PROFINET IO
•
– Device name
– Time limit
– Pulse time
– Swap
RS232
•
– Transfer speed
– Parity
– Stop bits
– Time limit
CM
•
– Transfer speed
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500