Siemens SIMATIC MV500 Operating Manual page 90

Application
5.1 Program
Menu command or
parameter
Match error
Format error
90
Possible values Default
See "Description" Match Error(%s !
column %x)
Freely selectable Format Error(%s)
character string
Description
Content and format of the string to be output in the
event of a match error.
The string can be a maximum of 100 bytes long. The
string consists of any combination of the following
elements:
Characters whose ASCII equivalent is between
•
"01H" and "FFH" ("%%" causes a percentage
character to be output)
Formatting instruction for output of variables
•
The following formatting instructions are possible:
%s[<1..12>]
•
%b
•
%x[<1..12>][:<1 ... 150>]
•
%e
•
%i
•
"%s" stands for the result string of the specified step.
If no step index is specified, the result string of the
step in which the match error occurred is output.
"%b" stands for the binary result.
"%s[<1..12>]" stands for the result string of the spec-
ified step or for the result strings of all steps in suc-
cession.
"%x[<1..12>][:<1 ... 150>]" stands for the match
string of the specified code of the specified step. If
the first index is omitted (%x[:<1..150]), the match
string of the step in which the match error occurred
is output. If the second index is omitted, all match
strings belonging to the step are output.
"%e" stands for a binary match error code (see table
"Match error code").
"%i" stands for the trigger ID.
Text for error in the "Format text" input box. The
string consists of any combination of the following
elements:
Characters whose ASCII equivalent is between
•
"01H" and "FFH" ("%%" causes a percentage
character to be output)
Formatting instruction for output of variables
•
The following formatting instructions are possible:
%s
•
%s stands for the output of the formatting instruction
in the "Format text" input box which generated the
error.
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500