Siemens SIMATIC MV500 Operating Manual page 27

Description of the status display
The following is an example of the auto-setup status display.
Overall progress
Position
Structure analysis This graph shows the distance values of the focus (
Decoding
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
This column displays the progress or current status of the automatic adaptation.
The alignment phase only occurs if you have started the adaptation using the
"READ" button.
values ( ) for the individual subROIs. The meanings of the sharpness symbols
are described in the following table.
The information on the far left of the graph refers to the subROI at the top left, the
information on the far right of the graph refers to the subROI at the bottom right.
During the structural analysis, the corresponding subROIs are highlighted in the
graph and in the image.
When the structural analysis is finished, the subROI with the best read quality is
highlighted in the graph.
In this column, you can see the step currently being run during the decoding
phase of the adaptation. Once automatic adaptation is completed, you can check
which settings were used in which cycle.
Application
5.1 Program
), as well as the sharpness
27