Siemens SIMATIC MV500 Operating Manual page 21

Automatic memory function in case of connection interruptions
If a connection is lost, the last program changes made are temporarily buffered. This
program is automatically displayed when the connection is re-established. The number after
the program name "Modified" indicates which program was open and modified during the
interrupted connection.
You may wish to save these changes immediately, since the changes will be lost if the
connection is terminated again or the program is changed.
Table 5- 2 Program steps & program-specific toolbar
Button
Program sequence
Program
Image acquisition
Decoder step
Result
Add decoder step
Delete decoder step
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
②
Description
Click this button to go to the "Program sequence" program step.
Click this button to go to the "Program" program step.
Click this button to go to the "Image acquisition" program step.
Click this button to go to the "Decoder step" program step.
Click this button to go to the "Result" program step.
Use a drag-and-drop operation to move this button to the desired position to add an addi-
tional decoder step.
Use a drag-and-drop operation to drag the decoder step you want to delete to the "Delete
decoder step" icon to delete the decoder step.
Application
5.1 Program
21