Start Page - Siemens SIMATIC MV500 Operating Manual

Start page

The "Start page" menu contains device and network information as well as information on
the installed internal ring light.
Table 4- 1
Group
Reader
Internal lamp
E-focus lens
Network
Control
If messages or warnings are present, they are displayed below the groups in the main
window of the start page.
Table 4- 2
Icon
Start
Stop
Button: Start automatic setup of READ function
Using the "Start automatic setup" button, you can automatically adapt all relevant program
settings. This function is identical to the function performed by the "READ" button on the
optical reader.
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
"Start page" menu groups
Description
This group shows the following device information:
Product version
•
Article number
•
MAC address
•
FPGA version
•
Firmware version
•
Licenses
•
Information about the built-in internal ring light is displayed in this group.
This group displays information about the built-in lens.
This group displays network information about the Ethernet interfaces.
You can start and stop the processing mode in this group.
Reader status
Description
The reader has the "Start" status. This means that the device is currently
in processing mode (RUN).
The reader has the "Stop" status. This means the device is currently nei-
ther in processing mode nor in productive mode. There is no operation
(STOP).
4
15