Program Sequence; Overview" Program Step - Siemens SIMATIC MV500 Operating Manual

5.1.1.2

Program sequence

Table 5- 5 Program sequence
Menu command or Possible values
parameter
Programs con- 1 ... x
tained
Use 1st image On/Off
5.1.2

"Overview" program step

The program overview provides you with information about the currently selected program
and you are given the option of having the parameters assigned automatically or making the
settings manually.
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Default Description
1 Select the programs that the program sequence
should use. You can select the programs with the
left mouse button + Ctrl.
Off Turn on this parameter to use an image acquisi-
tion with the acquisition settings of the first pro-
gram sequence contained in the program. Using
the acquired image, processing is attempted with
all the programs selected in the "Programs con-
tained" parameter.
If the parameter is disabled, separate image ac-
quisition is carried out for each program selected
in the "Programs contained" parameter with the
image acquisition settings stored in this program.
Application
5.1 Program
23