Terminal Module Tm54F - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
3.1 Diagnostics via LEDs
3.1.4.4

Terminal Module TM54F

Table 3- 53 Meaning of the LEDs on the Terminal Module TM54F
LED Color
READY -
Green
Orange
Red
Green/red
Green/orange
or
Red/orange
L1+, L2+, –
Red
L3+ –
Red
202
Status
Off Electronics power supply is missing or outside permissible
tolerance range.
Continuou The component is ready for operation and cyclic DRIVE-
s light CLiQ communication is taking place.
Continuou DRIVE-CLiQ communication is being established.
s light
Continuou At least one fault is present in this component.
s light Note:
The LED is activated irrespective of whether the
corresponding messages have been reconfigured.
Flashing Firmware is being downloaded.
light 0.5
Hz
Flashing Firmware download is complete. Wait for POWER ON
light 2 Hz
Flashing Component recognition via LED is activated (p0154).
light
Note:
Both options depend on the LED status when component
recognition is activated via p0154 = 1.
ON The controllable sensor power supply is functioning fault-
free.
Continuou There is a fault in the controllable sensor power supply.
s light
ON Sensor power supply is functioning fault-free.
Continuou There is a fault in the sensor power supply.
s light
Description, cause
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
Remedy
–
–
–
Remedy and
acknowledge
fault
–
Carry out a
POWER ON
–
–
–
Commissioning Manual