Sensor Module Cabinet Smc10 / Smc20 - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
3.1 Diagnostics via LEDs
3.1.3.4

Sensor Module Cabinet SMC10 / SMC20

Table 3- 42 Sensor Module Cabinet 10 / 20 (SMC10 / SMC20) – description of the LEDs
LED Color
RDY - off
READY
Green Continuous
Orange Continuous
Red Continuous
Green/ 0.5 Hz
red flashing
light
2 Hz
flashing
light
Green/ Flashing
orange light
or
Red/
orange
192
Status
Electronics power supply is missing or outside permissible
tolerance range.
The component is ready for operation and cyclic DRIVE-
CLiQ communication is taking place.
DRIVE-CLiQ communication is being established.
At least one fault is present in this component.
Note:
LED is driven irrespective of the corresponding messages
being reconfigured.
Firmware is being downloaded.
Firmware download is complete. Wait for POWER ON
Component recognition via LED is activated (p0144)
Note:
Both options depend on the LED status when component
recognition is activated via p0144 = 1.
Description, cause
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
Commissioning Manual