Siemens SINAMICS S120 Commissioning Manual page 60

Commissioning
2.2 STARTER commissioning tool
Settings in STARTER
In STARTER, communication via Ethernet should be set as follows (the Ethernet interface
that we use in this example has the designation Realtek RTL8139):
Tools -> Set PG/PC Interface...
Figure 2-4
Right-click on the the drive unit -> Target device -> Online access -> Module address
58
Selecting the Ethernet interface at the programming device
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
Commissioning Manual